This should only be indicating time for an oil change. Now, if the red, check engine light comes on, then you have an oil/engine problem.
Possibly the maintenance light wasn't reset when the last change was done. If you don't have the owners manual to check, I found a referenced method (below) to reset it through AMSOIL synthetic oil products. Good Luck
To reset Engine Oil light. Turn the ignition key to RUN with the engine off. Fully press and release the accelerator pedal three times within five seconds. If the Change Engine Oil light is flashing, the system is reset. The light will flash for up to 30 seconds or until the ignition is turned off. If the light comes on again and stays on for 30 seconds at the next ignition cycle, it did not reset. You will need to reset the system again.
The oil maintenance light will come on every 3000 miles telling you to get an oil change. look in the owners manual for the steps to reset the oil message.if no owners manual google it
990 views
Usually answered in minutes!
×