Wiring diagram for mercedes 190e w201

Sorry but MB doesn't allow free access to their wiring diagrams.

check the fuse for power window in engine compartment fuse block, or inside under steering wheel.

Serpentine Belt Diagram - 87 Merc 190E

Go to the following web site below (copy and paste the web address below into your browser)

http://www.daycoproducts.com/daycoweb.nsf/cf652a4feb630ad0862571a4005ae40c/a866a821123f887c862571a5006988df!OpenDocument

There are 2 PDF documents to open - above the photo on the site.

The first - the Routing Guide - shows the reference for the belt diagram (1987 MERC 190E) which is 6-2 on page 92 of the Guide.
The second PDF shows the belt diagram for 6-2.

Hope this helps.
Cheers
Sean
Voluntary contributor.

Check the seat belt wiring under your front seats, seat belt pre tensioners are related to the srs system and sometimes with seat adjustment these can become loose. The wires are mostly yellow in colour and if you check all connections are tight this may solve your problem

There could be 4, 5, or 6 pulleys on the 190E 2.6. Here they are.

This is for the 1990 190e 2.6. That's as new as my software goes. It may be the same, but I'm not absolutely sure.

hi,you have to remove your under dash,drill the lock on steering lock mechanism,you can turn the key,renew steering lock mechanism and tumbler,ty

You may have a loose connection under the fuse box, same thing happended to me in a Rover Viteses
Another problem caused by hanging a bunch of keys on theignition lock causes the lock to wear and as the keys swing it cuts the ignition

I suspect they will as the rear end is almost identical