Replacing serpentine belt I need a diagram. The belt broke and I'm not sure how to put the new one on.

You can find the diagram on the radiator support or the hood, the store where you buy the new belt, or do an internet search for belt diagram.

from autozone.com

Check under the hood.Usually on the top of the radiator shroud, there is a diagram showing the routing of the serpentine belt. Be sure you have some type of tool to pull the belt tensioner back far enough to put the new belt on.

http://www.mvreader.com/multiview/dayco/zoom.php?zoom_item=C0001J&l=&catalog=auto&category=2

The web link should take you to a diagram of the serpentine belt. Hope it helps!

Here is a link to a set of videos about how to replace your serpentine belt. http://www.wonderhowto.com/how-to/video/how-to-change-a-serpentine-belt-on-your-car-39904/

It's important to know the routing of the new belt when you replace it. There should be a routing diagram in the engine compartment near the top of the radiator. If you don't see one, you can use this diagram as a guide...

Get a 3/8s drive rachet put in

are you sure you put it on the right way go to autozone.com and get a belt diagram. did you put the belt on upsidedown?

that is your belt tensioner!! You pull that back when you are gettin ready to finnish putting your belt on the last pulley!! Follow diagram under hood for your specs on motor!!

Use this link:

http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c1528008ef45

There is a diagram under the hood showing how
the belt fits over all those pulleys. It's either on the
hood itself or on the chassis near the hood pin release pin.
JB