1995 ford explorer it was driven to where it is and know will not start. Have replace both the crank and cam positioning sensors. Turns over but will not fire, removed air cleaner and gave a shot of either - no difference.
The ignition module is most likely bad-Check for spark by pulling a plug wire out of the coil pack-(with the engine off). when the engine is cranked spark should jump right from the coil tower to the plug wire- if you don't have a strong spark then either the ig. module - the PCM or the wiring to the crank sensor is bad.A bad crank sensor will definitely cause a no start- but you have already changed that...
Does you fuel pump delivers fuel. Is it there a spark.
773 views
Usually answered in minutes!
×