Fuse 1: 30A, Green; A/C Heater Motor
Fuse 2: 30A Silver (Circuit Breaker); Power Windows
Fuse 3: 15A Light Blue; Overhead Consule, Day/Night Mirror, Reverse Lamps
Fuse 4: 5A Tan; ABS (There is not on in the picture)
Fuse 5: 20A Yellow; Power Door Locks
Fuse 6: 20A Yellow; Horn Relay, Instrument Cluster, Radio Choke Relay (on Premium audio system)
Fuse 7: 10A Red; Buzzer Module, Stop Lamps
Fuse 8: 20A Yellow; Headlamp Switch
Fuse 9: 15A Light Blue; Cigar Lighter
Fuse 10: 20A Yellow; Windshield Wiper
Fuse 11: 20A Yellow; Turn Signal
Fuse 12: 10A Red; Radio
Fuse 13: 4A Pink; Recives power from Fuse 8 to power instrument lights (such as the cigar ligher lighting, ash tray light, dash lights, radio lights, etc.)
Fuse 14: 15A Light Blue; Instrument Cluster
Fuse 15: EMPTY
Fuse 16: 5A Tan; Buzzer Module, 4WD Indicator Lamp, Tranny O/D Switch, Tranny Oil Temperature Sensor
Fuse 17: EMPTY
Fuse 18: EMPTY
Fuse 19: EMPTY
Fuse 20: 25A Natural; Park Lamp Relay, Off Road Lamp Switch (There is not one in the picture, I believe this is only on vehicles with fog lamps)
NOTE 1: Fuse 3 and Fuse 14 provide power for the Airbag Control Module Cavities 2, and 1, respectivly.
NOTE 2: Fuse 4, Fuse 7 and Fuse 11 provide power for the Controller ABS Brake Cavities 7 and 12, 9, and 3, respectivly.
Under Fuse 4, 8, and 12 is the Buzzer Module (Black rectangle in the picture)
Under Fuse 16 is the Hazard Flasher (Silver circle in the picture)
Under Fuse 20 is the Horn Relay (White plastic looking in the picture)
To the side of Fuse 17 and 18 is the ABS Warning Lamp Relay (Open cavity in the picture)
To the side of Fuse 19 and 20 is the Turn Signal Flasher (Blue circle in the picture)
Between the Turn Signal Flasher and the Horn Relay is the Time Delay Relaly (the other Silver Circle in the corner, in the picture
SOURCE: Fuse Box ( cover) diagram for a 95 Lexus LS 400 is missing.
check the wiring harness beside the hinge that moves when you close the trunk.i have seen the wiring get pinched and the ground gets broken. the tail lights have separate left and right side fuses.get a test light,and with the ignition in the on position,there should be power on both sides of all the fuses.the atc type have little test pins on them.ground the test light and put the tip on the fuse.if there is power,the light will come on. if a fuse does not light up the light on both sides,it is open.since the fuses are see thru,it is apparent if it is blown as the metal inside will be burnt.
SOURCE: 2006 Dodge Ram 2500 diesel truck----need inside fuse box diagram
If you are looking for the fuse box diagrams or any other diagrams for your Ram, check promanuals.net for a factory service manual for around 20 bucks or so. It's an invaluable tool for my Ram 2500.
19,721 views
Usually answered in minutes!
×