How do i replace my timing cover gasket on a 1997 jeep grand cherokee limited with a 5.2 liter v8 engine?
Pull the alternator brackets and front engine brackets off until you get to the water pump. You will also need to remove the fan shroud and then the fan. Remove the water pump and then you will see an aluminum cover and that will be your timing cover. remove the cover and clean all the gasket off the engine and the cover. use a razor blade, and make sure there in no oil or grease on the parts where the gasket lies. Put your gasket on, bolt the cover back on with the new gasket and repeat the teardown process in reverse.
2nd post adds the engine size
the fsm is free to read,ive posted it 100times
5.2 L
chapter 9
page 25
1,043 views
Usually answered in minutes!
×