Rough idle service engine light on ,stalling starts right back up ,then doe,s it again every 5 minutes or so

Throttle position sensor or maf sensor malfunction.

What does your codes tell you?

Here are the most common causes of idle surge, rough idle esp when cold and stalls at stops, slow idle speed, erratic idle speed, rough idle and engine hesitation (and other problems), it is in most cases the idle speed control air-bypass valve and or throttle valve and upper intake, these area's get full of gunk and combustion residue over the miles and cause idle issues (stalls, low idle) like yours, Get a can of intake cleaner from any local parts store, not carb spray, intake cleaner, it is made by a company called CRC, remove the air intake hose to the engine, hold the idle high so the engine won't stall, then spray the can of cleaner into the intake while keeping the engine running, use at least 1/2 the can, shut down the engine and disconnect the battery for 5 minutes, then restart and complete a number of mixed driving cycles, town, freeway, stop and go etc., after a few days the problem will go away as the system will relearn to the clean intake.

change the fuel filter and check the fuel pressure

Here are the most common causes of idle surge, rough idle esp when cold, other symptoms include stalls at stops, slow idle speed, erratic idle speed, rough idle and engine hesitation (and other problems), it is in most cases the idle speed control air-bypass valve and or throttle valve and upper intake, these area's get full of gunk and combustion residue over the miles and cause idle issues (stalls, low idle) like yours, Get a can of intake cleaner from any local parts store, not carb spray, intake cleaner, it is made by a company called CRC, remove the air intake hose to the engine, hold the idle high so the engine won't stall, then spray the can of cleaner into the intake while keeping the engine running, use at least 1/2 the can, shut down the engine and disconnect the battery for 5 minutes, then restart and complete a number of mixed driving cycles, town, freeway, stop and go etc., after a few days the problem will go away as the system will relearn to the clean intake

When the check engine light is turned on by the powertrain control module (computer) a fault code is stored to record what it is that caused the fault, in order to begin the process of diagnosis of this problem you have you must have the control module scanned for the stored codes.

does ur car have a engine light come on? cant really tell u answer if u dont explain more.

the engine is emitting more carbon than the exhaust can transfer out befor cloging the o2 sensor
can rebuild the engine. not to confirm this simply pull the o2 back out take brake parts cleaner and spray it let air dry then reinstall and if it does it agine you know the engine needs rebuilt

have the car checked when the check engine light is on,also a good scanner will be able to give you the history codes,get back to me with the codes and we'll go from there. you need someone with a professional scan tool

Here are the most common causes of surges, stalls at stops, low erratic idle speed, rough idle and engine hesitation, it is in most cases the idle speed control air-bypass valve and or throttle valve and upper intake, these area's get full of gunk and combustion residue over the miles and cause idle issues (stalls, low idle) like yours, Get a can of intake cleaner from any local parts store, not carb spray, intake cleaner, it is made by a company called CRC, remove the air intake hose to the engine, hold the idle high so the engine won't stall, then spray the can of cleaner into the intake while keeping the engine running, use at least 1/2 the can, shut down the engine and disconnect the battery for 5 minutes, then restart and complete a number of mixed driving cycles, town, freeway, stop and go etc., after a few days the problem will go away as the system will relearn to the clean intake.