Grinding noise changes with speed stops when turned right. replaced left front wheel bearing. noise is still there. whats wrong ?

Does sound stop when you turn LEFT?

Turning RIGHT puts the heavy load on the LEFT front wheel.
That initially STOPPED the noise, correct? So why did you change L?

Turning LEFT puts the load on the RIGHT. Did you change the RIGHT?

Let's say this:
If turning RIGHT stops the noise, it's the RIGHT one that's likely bad.
If turning LEFT stops the noise, it's the LEFT one that's more likely bad.

Make sense? Turning RIGHT loads the LEFT wheel; and vice-versa as the WEIGHT SHIFTS AWAY FROM THE TURN.

More than likely it is what some folks call a CV joint problem, not wheel bearings. Try backing up and then going forward to see if "clunking sound" or a sharp "bang" is heard. Wheel bearings and CV joints only work if smooth. Sometimes a BEARING RACE is bad. Also, a bad spindle / part of the CV joint / transaxle assembly worn or badly machined. If in a WET ENVIRONMENT especially, u may want to try marine grade grease or teflon-added grease.




Does sound come from POWER STEERING PUMP area?

CV joint problem