At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Wonder if anyone out there knows which wire is which on the 97 Toyota Tacoma power mirror,trying to build a wire harness for a set of power mirrors. 1.yellow/w blk stripe 2. white/w blk stripe 3. solid gray 4. gray/w grn stripe 5. gray/w red stripe 6. pink/w green stripe 7. pink/ w blk stripe any help would be greatly appreciated. Glen
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Check for burnt fuse. Check for loose, corroded, burnt or melt connectors at rear of the mirror switch and within the mirror assembly.
Also jiggle the wire harness at different points while keeping the ignition switch at ON position
Pull off the triangle shaped cover on the inside of the door panel over the mirror area by prying it off. Remove the three 10mm nuts behind the cover, unplug the connector and slide the mirror off the door.
Here is repair information from Mitchells: 1) Disconnect power mirror switch connector. Connect test light between power mirror switch harness connector terminal "A" (orange wire) and ground. If test light illuminates, go to the next step. If test light does not illuminate, repair open in orange wire between power mirror switch and righ rear power distribution center fuse block No. 1 (located under left side of rear seat). 2) Connect test light between power mirror switch harness connector terminals "A" (orange wire) and "J" (Black wire). If test light illuminates, check for poor connections at the power mirror switch. If connections are okay, replace power mirror switch. If test light does not illuminate, repair open in Black wire between power mirror switch and ground.
×