How do you change a brake light in a 97 honda accord?
1. Open the trunk and remove the taillight cover by turning the knob.
2. Determine which of the two bulbs is burned out: tail/stoplight or turn
signal.
3. Remove the socket by turning it one-quarter turn counterclockwise.
4. Remove the burned out bulb from the socket by pulling it straight out of its socket.
5. Install the new bulb in the socket.
6. Reinstall the socket into the light assembly.
7. Test the lights to make sure the new bulb is working.
8. Reinstall the taillight assembly cover.
If I remember right there are bolts the can be accessed from inside the trunk after removing the plastic panel. Then the whole tail light assembly can be removed, and the lightbulb can be changed.
428 views
Usually answered in minutes!
×