-
Ford Master
426 Answers
- Posted on Nov 12, 2009
Re: HOW DO U GO ABOUT PUTTING IN A HEATER CORE. NEED
1. drain coolant
2.remove instrument panel
3. for 5.4 (4v) if equiped,remove junction splash shield
4.for 5.4 (4v) if equiped, disconnect starter relay cable
- For 5.4L (4V), if quipped, remove junction block bracket.
- Clamp inlet and outlet heater hoses.
- Disconnect heater hose from heater core by gently pressing it toward heater core.
- Remove A/C plenum demister adapter.
- Disconnect vacuum line.
- Remove 13 plenum chamber top screws.
- Remove blend door assembly from case.
- Remove heater core.
To Install:
NOTE: If needed, clean and lubricate coolant hoses with plain water.
HOW DO U GO ABOUT PUTTING IN A HEATER CORE. NEED - 0f0dfb5.gifg src="/uploads/images/0f0dfb5.gif" alt="0f0dfb5.gif" class="h_mi" />
- Install heater core.
- Install blend door assembly to case.
- Install 13 plenum chamber top screws.
- Connect vacuum line.
- Install A/C plenum demister adapter.
- Connect heater hose to heater core.
- Release all clamps from inlet and outlet heater hoses.
- For 5.4L (4V), if quipped, install junction block bracket.
- For 5.4L (4V), if quipped, connect starter relay cable.
- For 5.4L (4V), if quipped, install junction splash shield.
- Install instrument panel.
- Refill engine coolant.
I hope this helps you
×