Hiya,
There are 5 automatic transmissions used in the Ford Ranger, Explorer and Mountaineer. They may be identified by checking the transmission code on the Safety Standard Certification Label attached to the driver's side door post, in the space marked Trans. The transmissions can also be identified by a tag attached to the lower left hand extension attaching bolt. The transmission codes are as follows:
So, what you need to do now is...establish from a FORD workshop, whether both the A4LD and 4R55E transmissions share the same components and mounting dimensions.
Cheers,
Scott
What transmission will fit 2005 ford ranger automatic 2.3
I have a 1996 ford explorer EB Edition 4x4 4dr. with a 4.OL V6 wont move in forward or reverse and even in 4 wheel drive at high rpm barely moves. ( tranny fluids are ok)
I was thinking it might be torque converter or converter solenoid
YOU HAVE 3.0 V6 183 CU IN. AND 4.0 V6 244 CU IN. YOU HAVE TWO DIFFERENT ENGINES.BESIDES ONE IS 2WD THE OTHER 4WD.IF YOU GOING TO CHANGE TRANSMISSION I WOULD GO TO AUTO PARTS PLACE AND THEY WILL TELL YOU WHAT TRANSMISSION GOES WITH YOUR TRUCK.
7,839 views
Usually answered in minutes!
×