Hi there,
Yes, and No....
Although the Airbag diagnostics #51 & #52 are related to the basic fuse/power issue, if you simply replace the fuse, it will continue to blow the replacement fuse until you correctly erase all airbag codes from the computer.
There is a way to do this, without the need for a diagnostic scanner....
If you are technically inclined and can make up a 2 x jumper wires (each with tiny alligator clips on the ends), I can show you how to do this.
If yes, then you need to locate and confirm your data connector is the same as this one (found in the interior fuse box):
Let me know...
Cheers,
4,225 views
Usually answered in minutes!
×