At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
its true it was an accident. it only went like 10-15ft or less and i shifted back. i mean could it ruin my tranny? maybe maybe not. anyone out there had same experiecne. there must be a reset button.its true it was an accident. it only went like 10-15ft or less and i shifted back. i mean could it ruin my tranny? maybe maybe not. anyone out there had same experiecne. there must be a reset button.
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
On the 1995 Jimmy, the shift cable can come loose on the mount on the side of the transmission where the cable meets the trans. When it slips, the alignment goes off and causes the driver to not be able to put the trans into park. If you take a long stick you can push the shift arm on the trans to the park position and your trans will go into park.....what you (and I) really need to know is how to take the shift cable mount apart and reset it.
If your truck has a dashboard push-button 4x4, then carefully disassemble and clean with Q-tips and alcohol. when 4x4 lights turn off, drive in reverse over 15 feet. Good luck.
hi how are you doing? just had same problem with by gmc i replaced the transfurcase motor and it works fine. the electric motor moves the shifter in your transfurcase from 4hi to 4lo and 2hi.there is only 3 things that operate your 4x4 the switch the motor and the control modgual.
Hello;
Have you checked the front axle shift solenoid? I have seen these break and have seen the fork shear as well.Make sure it is engaging when you push the button.
Thanks;
Rich
RPM Northwest
its true it was an accident. it only went like 10-15ft or less and i shifted back. i mean could it ruin my tranny? maybe maybe not. anyone out there had same experiecne. there must be a reset button.
×