2002 Saturn VUE Logo

Related Topics:

Anonymous Posted on Oct 15, 2009

2002 saturn vue. replacing front bearings. I

2002 saturn vue. replacing front bearings. I have everything torn apart but i cannot get the spindle to seperate from the hub. I tore it all down after failing with regular the hammer jack and also the wrench, ie the pull bar. Any idea on how to get the spindle to pull out of the hub assembly? I am refering to the half shaft that is attached throough the hub assembly

  • Anonymous Oct 15, 2009

    everything has been removed. strut bolts, ball joint, and also teh bilt under the unit eith cotter key.

×

1 Answer

Anonymous

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

President:

An expert whose answer got voted for 500 times.

  • Master 205 Answers
  • Posted on Oct 15, 2009
Anonymous
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

President:

An expert whose answer got voted for 500 times.

Joined: May 01, 2009
Answers
205
Questions
2
Helped
80626
Points
1115

Have you un bolted the strut and disconnected the ball joint you have to do this to have room for the shaft to come out

Testimonial: "One oclock in the morning, im still working on this POS and he answers my question. Does your mechanic answer the phone at 1 a.m.? Thanks!"

  • Anonymous Oct 15, 2009

    if you have removed every thing plus the the spindle nut then it is a matter of bute force ie a big hammer it must be fused in by heat cause it should come off with medium force. try some heat and a big hammer

×

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

Which years have interchangeable body panels?

A salvage yard would be a likely source of interchangeability information.
0helpful
1answer

Whats the torke on the bearing of saturn vue 2007

Axle/Spindle nut Front-151ft lb. Rear 81ft lb. Front Hub mounting bolts are 96ft lb. Rear hub mounting bolts are 62ft lb.
5helpful
2answers

I have a 2003 Vue...and the ABS light will not turn off...is it safe to drive until I can get it fixed?

If ABS light is on,you still have base brakes,just like an older vehicle with no ABS.Not a problem,as a matter of fact I always disable the ABS on my vehicles because I don't like it.
0helpful
2answers

2002 Saturn Vue V6 AWD sounds like an F1 car when i drive it. Very loud constant noise. Checked trans fluid and it was fine.

I have a 2002 saturn vue. Same thing..sounded like a jet engine ...loud humming as I accelerated . It got increasingly worse. It turned out to be the front wheel bearings. Replace them, now the noise is half as loud...have to do the rears also! 93,000 miles on it. Also, don't forget to replace the timing belt. It it goes too long and breaks, it will trash the engine...
4helpful
2answers

My 2004 saturn vue redline makes a roarong noise

we have a 2003 saturn vue which we installed new tires on and we noticed a noise about 6 months afterwards. it sounded to my wife and i to be loud road noise from the tires. the car was driven for 6 months and we decided the noise was annoing. had the tires checked only to find it was the left front wheel bearing which was replaced and stopped the noise.
4helpful
1answer

I just had my wheel bearings replaced on both right and left sides in the front of my 2002 saturn vue. My vue sounds very loud when I am driving. What is it?

Vues are bad for having all hub bearings make noise,check your rear ones.Or the ones you didn't have replaced.If it's all wheel drive check the propshaft center carrier bearing.Common to fail & make noise.hope this helps
0helpful
1answer

Humming noise when driven

it could be the bearings werent packed enough with grease or it could be the tire making the noise.
0helpful
1answer

2006 Saturn Vue Wheel Bearing

it should come out once you have disconnected:Brakes,strut,ball joint.tire rod end,cv joint!if it is not put the cv joint nut back on until safe enough to give it a tap with hammer to knock back & out shaft this should come as one piece HUB the bearing is pressed in! better to change whole HUB good luck this hopefully helped you out!
0helpful
1answer

2005 SATURN VUE ABS, AWD, R/FRONT BEARING REPLACEMENT

just did one today. removed housing from car, and used a press . be careful of aluminum housing. also used penatrating spray. clean oxidation from inside bearing hole,then lubricating, helped in installation
4helpful
1answer

Front wheel bearing

what is the procedure for changing a front wheel bearing on a 2002 saturn vue?
Not finding what you are looking for?

376 views

Ask a Question

Usually answered in minutes!

Top Saturn Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...