Most of the time the cruise works fine, but on occasion it will just seem to shut off and won't come back on until the van has been shut off for some time.
The Venture uses an electronic Cruise Control and doesnt require vacume. I would suspect the cruise module under the hood, or the lever on the steering colum to be bad.
Testimonial: "You're right on the no vacuum part. I kind of suspected the unit under the hood myself, but was hoping there might be a cheaper fix. :-) Thanks 4 info"
Also check your switch on the break pedal bracket that might be loose. It is a swich same like a switch for break lights.
Check the vaccum for the cruise it sounds like a bad line maybe causing a pressure drop
906 views
Usually answered in minutes!
Thanks for the tip Chucky, but my particular control unit has no vacuum running into it.
I'll check this, but I kind of doubt it because once it decides to shut down it won't come back on until the van has shut down enough to cool off.
Wow! Thanks Leslake! I was just thinking it would be nice to know what pins should be 'hot' when the unit is turned on so that I could test them when it wasn't working. Most helpful!!! Thanks again!
×