At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The rod bearing cap bolt torque specifications for the 3.0L V6 engine in a 2000 Ford Ranger XLT 4x4 with a manual transmission are as follows:
Step 1: Tighten the bolts to 15 foot-pounds of torque.
Step 2: Tighten the bolts to 30 foot-pounds of torque.
Step 3: Tighten the bolts an additional 90 degrees (1/4 turn) using a torque angle gauge.
It's important to follow the torque specifications and sequence in the manufacturer's service manual to ensure proper tightening and prevent damage to the engine.
ive had this question before. It is under your center console where the cup holders are. up tworge the front, take the console off and you will see it a little square box silver in color with a wire harness plugged into it. hope i helped.
you will probably find the problem stated with a poor connection in the headlight switch plug and is now heating up and looseing conection in a short time.remove the headlight switch and you will see what i mean.
×