I have a scion xa 2006 car and the key remote is not working. I tried changing the battery but it wasn't the problem. I wanted to have it fix before winter comes but afraid that it might cost me a lot. Is there a way i can fix it myself?
1.Insert key in ignition and pull out
2. Within 5 seconds, insert the key in the ignition and pull out again.
3. Within 40 seconds, close and open the driver's door twice, then insert and remove the key from the ignition again.
4.
Within 40 more seconds, close and open the driver's door twice, then
insert the key in the ignition and close the driver's door.
5. Turn ignition switch from LOCK to ON to OFF three times, leaving the key on for one second and off for one second each time.
6. Remove the key from the ignition lock.
The doors will lock and unlock themselves at about 2 second intervals.
The number of times that the doors lock is the number of remotes that
are programmed into the car. If the car locks/unlocks 5 times, there are no codes registered.
I have problem with my doors in car I can open two doors and two not so what it can be the problem?
4,726 views
Usually answered in minutes!
×