How to remove back window for 2007 Dodge 1500 quad cab. I Wana go get one from junk yard. Do u need a special tool or solvent?

google 2007 DODGE RAM 3.7 FIRING ORDER select mages
copy and paste

https://www.justanswer.com/dodge/afxco-2011-dodge-ram-1500-3-7-spark-plug-wire-installation.html

Rise the hood remove the two assembly retaining screws then you have to pull towards the front of the truck and kind of wiggle the asembly back and forth I have the same truck and thought i would breck it but it came right out you will need to adjust the headlights when you re install

salvage yard is your cheepest bet.

Hi
There is 3 torx screws that hold the cover over the switch,,,,,remove them to remove the cover,,,there is 4 torx screws on the switch its self ,,, remove them and then you unplug the wire end from the switch,,,,, remove the switch,,, place the new switch in possion ... install the wire end to the switch,,, place the 4 screws in the switch and tighten Hand tight,,,, install the upper and lower cover pices and install the screws,,, hand tight....

let me know if i can help more

ac has freon and is not cooling and the compressor is on

That Yellow is Not a Special Order But, Is reserved for the Performance and Sport Models. It has been in Production for 6 Years. There is no Telling how many have been Produced as it is a Common Sport Color. If it was a Special Order Color it would say on the Web Forums for Dodge, No Listings. Please Rate my Respone, I need all the Help that I can Get! Thanks!

Have it sacnned for a code. it seems to be the speed sensor at the tranny.or the crankshaft position sensor. hope this helps. will you please vote ?

Have it scanned for a code. it could be a variety of things that are wrong. And I am almost sure it is a sensor. Specially the cranshaft position sensor or the Idle position sensor.

the channel came off the glass you have to take the door panel apart either screws or pop the clips out with a panel tool from parts store about 3.00 and then put the glass back on the channel track,make sure the foam rubber is holding the glass in tight or purchase more rubber,about 3 hour job.

Yes It can and It should not void the warranty. Contact your dealer.