I have a 2014 Mazda 6 touring and my high beams come on and will not turn off.. also my low beams do not come on at all..if my fuse for my low beams have blown would my high beams automatically come on instead?

SOURCE: Low beams do not work but High beams do

you have to change just the low beam bulb. Ive already changed mine twice in my 06.

SOURCE: left low beam is out on my 2006 dodge ram 1500 4.7

I'd still vote for the bulb being bad. The high and low beams use two different filaments, so unless the bulb is physically broken, it is common for the low beam to be bad whilst the high beam is good.

That's why you see some people driving around with their high beams on -- they don't want to get stopped for a 'light out' citation..

When you take the bulb out to replace it, be sure to look at how it is mounted before removing. You don't want to accidently adjust your headling out of kilter.

good luck

SOURCE: Both low beam headlights stopped working at the

Could be the relay for the lowbeams is faulty, if your DRL's are your lowbeams, then your DRL Unit could be bad. Also did you blow a fuse cuz a random surge could blow the fuse

SOURCE: low beams don't work - both out at the same time.

DID YOU CHECK THE BULBS?

Testimonial: "spot on."

SOURCE: low beam not working but high beam is-Pontiac Vibe 2005

I have heard it could be the Daylight Running Light module located under the dash above the brake pedal. The module controls both the daytime running lights and the low beam lights. The high beams are independent of this module.

I have the same problem. I am trying to buy a new module.