Cars & Trucks Logo

Related Topics:

Posted on Dec 01, 2019
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

2007 Jeep Liberty makes a bumbling noise when speeding

Everything works fine when I'm driving fast if makes a weird sound on rear

1 Answer

Robert Wood

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Jeep Master 6,139 Answers
  • Posted on Dec 01, 2019
Robert Wood
Jeep Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Oct 21, 2014
Answers
6139
Questions
3
Helped
1188589
Points
20137

How fast ? 80,100, 140 mph ?

5 Related Answers

Anonymous

  • 137 Answers
  • Posted on Jan 19, 2009

SOURCE: Inoperable Power Window 2006 Jeep Liberty

the window regulator needs to be replaced

Ad

Anonymous

  • 3533 Answers
  • Posted on Mar 01, 2009

SOURCE: how to replace rear brake pads on 2005 jeep liberty

put the back of car on jack stands and secure the front tires so it does not roll and then remove the bolts off the back of the caliper there is normally two one at top and one at bottom and spray it with some kind of oil for rust and make sure you have the right size socket before you try to loosen them and once caliper is off and the old pads removed take one of the old pads and squeeze the piston on the caliper back in by using a "C" clamp and also remove some of the brake fluid from the master cylinder before you do this put the new ones back on and check the brake fluid and make sure it is full and then pump the brakes to make sure you have a good pedal also put some "No Squeak" brake stop on the back of the pads so they don't squeak they will have that where you buy the pads from

Anonymous

  • 163 Answers
  • Posted on Nov 28, 2009

SOURCE: jeep liberty 2007, window regulator died. What is

take off door panel and tap with a small hammer

mister_b_65

Bruce Carlson

  • 74 Answers
  • Posted on Dec 13, 2009

SOURCE: heater on2002 Jeep liberty wont stay warm unless its moving



Check to see if the coolant level is low.






Anonymous

  • 1 Answer
  • Posted on Feb 11, 2012

SOURCE: Fuse for brake light on 2007 Jeep Liberty

I dont have owners manuel and need to know what fuse is my brake lights ? All brakes lights are out . Thank you

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

2011 Jeep liberty acting weird after heater core replacement.

It sounds like there may be an issue with the electrical system of your 2011 Jeep Liberty after the heater core replacement. Here are some things you can check to diagnose the problem:
  1. Wiring: Make sure all the wiring has been properly reconnected and check for any loose or damaged wires.
  2. Fuses: Check the fuses to make sure they have not blown as a result of the electrical issue.
  3. Blower motor: If the blower motor is not functioning properly, it may be causing the issue with the blower speed. Check the motor for any damage or signs of wear and replace if necessary.
  4. Electrical control module: The electrical control module is responsible for controlling the various electrical components in your vehicle. If it is not functioning properly, it may be causing the issues with the blower and the radio.
  5. Radio: If the radio is only working on satellite, there may be an issue with the antenna or the connection to the antenna. Check the antenna and the connection to make sure everything is properly connected.
0helpful
1answer

Motor Mounts on 2007 Jeep Liberty?

motor mounts. they are readily available.
0helpful
1answer

What could be causing a vibrating noise when going slow speeds but decreases when in faster speeds

Hi Chris, I'm glad to help! Vibrating / Roaring sounds can be anything from rear or front diff problems. Drive Line U-Joint problem. Wheel bearing bad. Even transmission problem. You have to pin-point where the vibration is, is it in the front, in the rear, on the right or on the left. Is it in the center of the vehicle and so on. Hope this helps and have an awesome day Chris!
0helpful
1answer

Sounds like I have a flat tire but don't

Yes it is a thumping type sound when the front wheels rotate when driving. You need to have the wheel bearings checked.
0helpful
1answer

2007 jeep liberty suddenly won't start after

Try starting in neutral. Gear sensor may be heating up and not registering park.
0helpful
1answer

2002 jeep liberty sport my speed sensor went so i changed both and the computer says its still the speed sensor whats wrong...

I assume you replaced the input and output speed sensors on the transmission?

The speed sensor for the speedo is located in the rear differential. Look on top of the center of the rear differential and you should see a sensor bolted to it with two wires. Check the wiring harness to the sensor. Sometimes they rub through on the E-brake cables. If the wiring is good replace the sensor in the rear differential.

I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa

0helpful
1answer

2004 Jeep Liberty Noise/Problem

if you are driving on hard surface ( sealed roads) in 4wd then don't as if damages the drive train
what is happening is that there is a torque wind up from the front and rear wheels running at different distances and the cluck you hear is when at some point that torque is released and allows the selection to disengage or engage
4wd is for use in slipper conditions unless you have an AWD which will become 4WD when required by you after selection of the control
1helpful
2answers

Speedometer

the rear wheel speed sensor may be going bad......the pcm uses it for a speed signal
Not finding what you are looking for?

58 views

Ask a Question

Usually answered in minutes!

Top Jeep Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...