You can't adjust the clutch,your problem may be the slave cylinder.It is connected to the side of the transmission,first check your clutch master cylinder under hood on right side by firewall,if low,then slave cylinder is leaking and needs to be replaced,easy to remove,part is 17.99.I have a 85 Nissan truck,had her for 25 years,replaced mine a few times,use brake fluid.Get a 9.00 beeder kit at Autozone too.Here's a link on how to do and the bleeder kit...https://www.autozone.com/repairinfo/repairguide/repairGuideContent.jsp?pageId=0900c1528018d42a the bleeder kit.https://www.autozone.com/test-scan-and-specialty-tools/brake-bleeder/oemtools-one-man-brake-bleeder-kit/46839_0_0 Here's the slave cylinder.https://www.autozone.com/drivetrain/clutch-slave-cylinder/duralast-clutch-master-cylinder-12425/69758_1035179_0_238602
SOURCE: Need to replace water pump on a 93 Nissan pu, 30vg
if it is a 4x4 V6 take it to a shop you have to take off the timing belt & retime the the damn thing because the water pump is behind the belt good luck .
101 views
Usually answered in minutes!
×