Try https://big-manuals.com , it's very helpful in repairing your vehicle
SOURCE: 2001 jeep grand cherokee seat removal
i actually removed my 2 front seats very easily as a novice. There really is only i think 4 bolts that need to come out 2 in front and 2 in back. If i can remember correctly i believe it was a larger metric size. Although i dont have power seats, if you do just look for the clip connector and disengage
SOURCE: 2001 Jeep Grand Cherokee which fuse controls heated seats?
Fuse # 20, located in the Junction Block (interior, drivers side). This is a ten amp fuse.
CLICK_HERE
Read the information at the above site. The TSB (technical service bulletin) may be of interest to you.
SOURCE: Removal of 1997 jeep grand cherokee front seat cushion or seat
Check this info, and, be carefull:
ZJ-Secc-8R-Power-Seats
Good luck!!!
SOURCE: heated seats
Likely, the heating element in the seat has failed. The reason is simply that the drivers seat is in use more than any other seat in the vehicle. You can check continuity of the element with an ohmeter across the seat side of the heater connector. Check for power at the harness side with a volt meter. If there is power but no continuity, heater element has failed. Personally, I'd probably just live with it but you can either attempt to install a new heater element or if you can find a similar seat in a salvage yard, just buy it and put it in! (whole seat probably costs less than the element!!!
SOURCE: remove 2007 jeep compass bumper cover
Hello, I can assist you. Begin by rounding up the necessary tools:
7mm socket and ratchet
7mm wrench
10mm socket
screw driver or panel removal tool (for push rivets)
Now go to the following site and take a look at the step by step instructions and pictures which does a nice job of explaining this entire job. Thanks for using Fixya!
http://www.jeeppatriot.com/forum/showthread.php?t=6291
78 views
Usually answered in minutes!
×