Hello
u will find a lot of wiring diagrams and circuit diagrams help books and stuff like this at reliable-store
the girl in the chat box can help u instantly... im a frequent buyer there since Im a mechanic so take help from there
Poor battery connects or bad battery (cell). Try cleaning battery connections and test battery.
SOURCE: 2000 alero wont start
You should have you altenator checked most local parts stores will do it for free
SOURCE: 2000 dodge intrepid won't start
If the key is returning to the 'Run' position as it should, then either a relay controlling the solenoid or the solenoid itself is hanging up. The heavy contacts that send power to the starter can develop rough surfaces that can temporarily weld themselves together causing the starter to run on even though the engine is running and the key has returned to the proper position. There is also a spring that should normally help return the solenoid's contacts to their 'off' position that may be weakened.
SOURCE: 1994 Nissan Pathfinder won't start, even jumping it.
I had a similar problem w/ my 94 Pathfinder. The problem was a cheap security system that was offered in that year model and the wiring between the ignition and the starter was run through this system. The dealership was able to by pass the security system and this fixed the problem. For years other mechanics told me it was the starter but I knew it was something else.
SOURCE: 2004 crossfire starting problem
I had this problem and it need to have the crank shaft position sensor replace and it worked immediately I found this out the hard way after the car died several times and took time to start again
SOURCE: 2007 jeep cherokee wont start.
I have the exact same problem - did you ever find out what was wrong?
151 views
Usually answered in minutes!
×