Question about Dodge Cars & Trucks
Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Good luck!
Posted on Jan 02, 2017
SOURCE: Engine light on in 2000
it is your EGR Valve.
EGR stands for Exhaust Gas Recirculation. It is part of the vehicle emmissions system, and is used to reduce combustion temperature and pressure to control Oxides of Nitrogen. There are generally three parts to the EGR system: the EGR valve
, an actuator solenoid, and a differential pressure sensor EGR (DPFE). These things work together to deliver the correct amount of recirculation based on engine temperature, load, etc. The P0401 code means that OBD detected an insufficient amount of EGR.
Causes
A code P0401 most likely means one or more of the following has happened:
Possible Solutions
In fixing this code, it is quite common for people to just replace the EGR valve only to have the OBD code return. The EGR valve is not always the culprit.
LOCATION:
drivers side of the engine bay, just under the intake manifold plenum where the throttle body bolts up! If you take the air snokel off you'll see it better! It has a remote mountted vaccum solenoid with a 2 wire connector
going to it that you should be able to see near the throttle body.
Follow the hose from the solenoid down to the valve and you'll find it!
hopes this helps-------lebones
Posted on Jan 06, 2009
SOURCE: 1999 Dodge Grand Caravan horn and Cruise control
I recently had the same issue, but my airbag warning lights also turned on. If this is the case, it might be the clockspring. There is a recall on clocksprings for Caravans 1998 - 2000 I believe. I got it replaced for free in the dealership. Enter your VIN in this site and it will tell you if you are covered in the free replacement warranty.
http://www.chrysler.com/webselfservice/chrysler/index.jsp?screenName=recall&country=us&emailUrl=goToEmailForm%28%27R%27%29
Hope this helps.
Sonny
Posted on Mar 06, 2009
SOURCE: changing the body control module of a Dodge
it is above the fuse box, but it must be programmed, so if you replace it the car won't start, might as well have the dealer do it.
Posted on Jul 25, 2009
SOURCE: Where is the ABS control module located on a dodge
The ABS control module is below the master cylinder ,under the hood.It is attached to the hydraulic unit.This is the one with the brake lines going to it.
Posted on Nov 19, 2009
Mar 04, 2016 | 2010 Dodge Grand Caravan
Dec 05, 2015 | 2005 Dodge Grand Caravan
Jul 27, 2015 | Dodge Cars & Trucks
Mar 17, 2015 | Jeep Cars & Trucks
Mar 30, 2014 | 2005 Dodge Grand Caravan
Module (CCM)Mar 18, 2014 | 2002 Dodge Grand Caravan
Nov 05, 2017 | Cars & Trucks
Sep 07, 2011 | 2002 Dodge Grand Caravan
Feb 17, 2011 | 2001 Dodge Grand Caravan
Apr 22, 2010 | 2003 Dodge Grand Caravan AWD
35 people viewed this question
Usually answered in minutes!
×