We have removed the headrests/rods from the seat. how do we get the guide sockets out?
SOURCE: trying to remove a headrest from passenger seat in 2007 xc90
push & hold button on headrest while pulling up
SOURCE: Removal of headrest on 2005 Ford F150.
The headrest has on obvious button to adjust the height and another button kinda hidden to remove the headrest. The black plastic ring at the base where the metal poles insert into the seat is where the two buttons. You probably noticed the obvious on that sticks out of the side of one of the rings. The other plastic ring contains a similar button that is not noticeable due to it being flush with the side of the plastic ring. Adjust the headrest to its highest position, then locate the "hidden" button on the other plastic ring and depress it while lifting on the headrest and it should come out.
SOURCE: Headrest removal
When you pull it up all the way, you should see a very small hole at the base of the rod. Poke a small nail in there and that will release the catch.
SOURCE: cannot remove back seat headrests for 98 328i
Im doing the same thing.. Push the headrest full forward, then lift hard to get past last indent in pole.. This worked for the front as well.. i also could not find a hole to push
SOURCE: 2004 Chevy Cavalier headrest removal.
try putting a small screwdriver into the slots around the pole white ring on the bottom of headreat and pulling it out at same time. I would recommend two people doing this.
259 views
Usually answered in minutes!
×