Should be behind starter or motor mount
And your question is?
SOURCE: 1994 toyota 4runner front diff.seal replacement on passenger side
it should be the exact same process just with a little longer axel shaft
SOURCE: freeze plug needs to be replaced on 1994 Ranger
May help if you raise engine a little. But the other freeze plugs are most likley in same shape.
SOURCE: how many freeze plugs are on a 2000 blazer 4.3 vortec
The freeze plugs are spaced out in a straight line along each side of the block. If you see others at the same height in front or behind where the motor mount is, then yes it probably is a freeze plug.
Put a jack under the engine with a block of wood between the oil pan and the jack head. Raise it slightly to remove the motor mount through bolt, then remove the mount from the engine block. Now you should be able to replace the plug. Use a punch to drive in one side, then grip with pliers and pull it out. Clean the recess before installing new plug. Auto stores stock them in all dimensions, or take your old one in for matching up. The rubber expansion plugs work well, too, and easier to install.
SOURCE: I have a 1994 honda passport and all my windows
You have to check your master swicth for windows
68 views
Usually answered in minutes!
×