If you have any problems of car info, you can go on AutoFun: https://www.autofun.co.id/
SOURCE: how to find timing belts marks toyota rav4 2l
I have just replaced my water pump on my 1998 RAVE4, also, the timing belt and the other two belts. I had a tough time with the timing marks. The way you line these marks up is easy if you take the time, First, if you are changing the timing belt you pull the balancer and both top and bottom plastic covers,(do not try to pull top cover off before you take off balencer and the motor mount off or you will just break it.), Second after covers are removed you will have access to the timing belt, you can now remove it by loosening the tensioner bolt and pushing down on the tensioner wheel, the belt then can be taken off. Third take out number one sparkplug and replace the bottom cover by maybe two bolts so that you can see marks on cover, next replace the balancer and bolt. Turn the motor over by hand with the balancer so the small divit on the back of the balancer is on 0 or top dead center on the compression stroke, you can use a compression gauge for this or I just used a mirror and light to shine in the number one cylinder to see the piston. Next remove the balancer and cover and make sure to make a mark on crankshaft gear and housing. Next you will need mirror and flashlight, now turn camshaft gear clockwise to line the hole in the gear with the top timing mark. I recommend a small circle mirror for this. Now replace the belt. I turned the crank shaft gear one tooth counter clockwise off mark and the camshaft one tooth clock wise off mark so when the belt is on you can turn the camshaft gear counter clockwise to get tension on the belt and marks will line up. I would recommend changing water pump,tensioner wheel, and the idler wheel. After belt is on I would replace the bottom cover the balancer and the crankshaft sensor. Iwould then start it to make sure the water pump is not leaking and the motor is not pinging or you will have to tear it back apart again. Good luck and no I am not a certified mechanic just thought this would be helpful from my own experience.
SOURCE: TIMING BELT MARKS DONT MATCH AFTER ENGINE TURNED OVER
dont worry about that you will have to turn the motor over 40 to 50 time before those timing belt marks line up again if your pulley marks line up correctly thats all you have to worry about
SOURCE: timing marks 97 toyota corrlla
Click on the following free, direct Link. It has the Timing Belt Diagrams for your 1997 Toyota Camry for either the 1.6L or 1.8 DOHC In-Line 4-Cylinder Engines; including Marks and Instructional Diagrams.
Let me know if this helped...
http://www.2carpros.com/car_repair_information/year/1997/make/toyota/model/corolla/1997_toyota_corolla_timing_belt_diagram_marks.htm
SOURCE: CANT FIND TIMING MARKS FOR A 93 TOYOTA CAMRY 2200
i cant find out wheres the timing mark for a 1993 toyota camry
Here are the marks
1,135 views
Usually answered in minutes!
×