SOURCE: torque settings for big ends on a 97 toyota camry 220sei
On the V-6 it's 25 Nm (18 ft lbs) on the first pull and then you rotate the next pull 90 degrees using a torque angle wrench.
Checking the specifications for the four cylinder:
25 Nm (18 ft lbs) on first pull and 90 degrees
on the second pull using a torque angle wrench.
SOURCE: cylinder head torque settings for a toyota 1493cc
If you have a vehicle application for the motor you can get a Haynes or Chilton manual from your local auto parts store. They usual run around $30.
SOURCE: TOYOTA HILUX 2006 engine head torque specs
it depends on the size of the screws. i recommend to set torque as 100lbs for new bolts, 90 for old bolts
SOURCE: torque specs for Mazda titan t40 & timming
You need to buy the manual for this job. There is too much info to give to do the job correctly. Basically I would have to write the manual.
698 views
Usually answered in minutes!
×