How can I roll up my power window in 07 Chrysler sebring the moter is out got one coming in a week

James Bradburn

• 299 Answers
• Posted on Jan 18, 2009

SOURCE: 2003 chrysler sebring

Could be starter, or neutral switch in the tranny.

SOURCE: Power Windows won't work

Fuse is good you say? There are four may possible causes listed in this diagnostic article:

http://yourhandymanzone.com/Your_Handyman_Zone_How_To_Pages_Vehicle_Car_Zone_Cars_Trucks_Vans_Windshield_Windows_Window_Does_Not_Roll_Up_Down.htm

Good luck!
Brad

SOURCE: 07 scion tc passenger window wont roll down when lock by driver..

thats cause that what the lock is for so it wont go down

SOURCE: Driver-side window non-respondent (2003 4door Chrysler Sebring)

Your widow regulator is defective or the motor is defective. Remove door panel, using a punch, punch out the rivets, using a !/4 drill out the aluuminum plugs. Remove the regulator and inspect, if its not defective apply bearing grease when mechanism rolls up and down. Rivets must be replaced by 1/4 screws and nuts. Take motor apart, you will find three plastic plugs which have a tendency to disenegrate, replace these with ball bearings, pack the motor and I do mean pack it with wheel bearing grease. Reasemble.

SOURCE: My 1999 Chrysler Sebring does not start. It

chrysler has a TSB on this issue. but for now you will need to replace the starter. But first you should get it diagnosed to be sure