SOURCE: fuel gauge quit working. stuck on half a tank.
the fuel level sending unit has been incorporated into the fuel pump assembly.
the fuel pump is most likely your problem, these pumps dont like fuel additives so be careful.
most common problem with these fuel gauges is the sending unit, the sender contacts will errode over time fuel additives seem to speed the process.
replace the fuel pump assembly
hope this helps
SOURCE: Fuel gauge stuck behind peg at FULL mark
one thing you can try is to get one of those magnetic pick up tools at a parts store.......prefferably one with a large magnet...and put a cloth around the end of it so you dont scratch the plastic on you gauges and try to pull it back to where it belongs,i have done this a few times with good results,hope this helps
Testimonial: "Thanks for the tip. A strong magnet to the right side of the instrument cluster was used to reset the needle clockwise to its proper position."
SOURCE: 2006 GMC Envoy gas gauge not functioning properly.
GM had a problem with the fuel sending unit cards inside the fuel tank,If you replace that you should be good to go.
SOURCE: fuel tank gauge is not registering properly. after...
This is a very common problem with the Snate Fe. It is a scam so they can charge you $350 to replace a defective sensor. They know the sensors are defective and don't last long but it is a money maker so they have not done anything about it.
36 views
Usually answered in minutes!
×