Question about 1997 GMC Sierra

1 Answer

Replace sway bar end links '97 GMC Sierra

Replace front sway bar end links '97 GMC Sierra 4X4

Posted by on

  • Anonymous May 11, 2010

    i don't really understand if this was a question looking for the endlinks or help with installation- if you put your vehicle information in at advanceautoparts.comyou can search sway bar and find parts that you need - there was someinfo missing on which sierra model you have as far as engine size andvin # match but I came to:http://shop.advanceautoparts.com/webapp/...|GRPCHASAMS__sway%20bar___

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 3 Answers

If you put your vehicle information in at advanceautoparts.comyou can search sway bar and find parts that you need - there was someinfo missing on which sierra model you have as far as engine size andvin # match but I came to: http://shop.advanceautoparts.com/webapp/wcs/stores/servlet/partlist_Sway-Bar-Link-Kit_78_R|GRPCHASAMS__sway%20bar___

Posted on Sep 17, 2009

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why does my 2009 gmc Acadia sway at highway speed


Make sure the tire pressures are at the recommended pressure. Check for worn steering/suspension components particularly the front/rear stabilizer links as one or more may be broken.Has the alignment ever been checked rot proper angles?

Jul 19, 2015 | GMC Cars & Trucks

1 Answer

Solid bar in front end, two bushings on either side of front tires is this the sway bar?


if you are talking about the sway bar end links. you can replace them yourself to save a few bucks. first Raise the front of the vehicle with a hydraulic jack. Place jack stands under the frame on each side of the vehicle. Lower the hydraulic jack so that the weight of the vehicle is supported by the jack stands and the front wheels are off the ground. locate the sway bar end links on either side of the front sway bar. Remove the bolts from each end of the sway bar end link. replace the bushings in the same order you take them off. you can go to any auto parts store and buy end links for your car.

May 04, 2012 | 2001 Chrysler PT Cruiser

2 Answers

I need a part number for the rear sway bar linkage.


There two an upper and a lower.

lower sway bar link Napa part # 1031355 cost about $75.00.

Upper sway bar link Napa part # 1031356 cost about $70.00.

Jun 16, 2010 | 1997 Mazda MPV

1 Answer

97 gmc sierra won't go into 4x4. Electronic


Take the front axle actuator out of the axle. Plug it back in and have some one push the 4x4 button. The actuator should move, it's a liniar motor. If it doesn't then the actuator is bad or there is a wiring problem. If it does there is a problem in your front diff or some where else in the system.
I'd take a guess and say it's the front actuator.

Oct 11, 2009 | GMC Sierra 2500 Cars & Trucks

1 Answer

Front end noise


sounds like it may be sway bar links however it can also be the ball joints

Sep 23, 2009 | 2008 GMC Sierra 2500HD 2WD

3 Answers

Front end shakes at 50mph, possible stabalizer bar,


Do a replacement. There is no way to adjust the bar.

Aug 24, 2009 | 2006 Jeep Wrangler

2 Answers

Clunking noise coming from front end


on the 97 escort,check the sway bar,also the sway bar links.My daughter has a 97 escort,both sway bar links had to be replaced at 150,000.mi.relatively cheap to & easy to Replace.hope this helps
Richard

Apr 30, 2009 | 1997 Ford Escort

3 Answers

How do i find a diagram showing my front end sway bar bushings?


The sway bar bushings are under the large clamps that hold the bar to the frame. The ends of the sway bar are connected to the struts by the sway bar links. When the links wear out, they clunk--not squeak. The bushings are under the retainer in the pic below.

0996b43f80231399-sulc2cgngkoxge0rocse0fez-3-0.gif

Aug 06, 2017 | 2000 Dodge Dakota Quad Cab

1 Answer

02 gmc yukon dunali xl


Check for warped brake rotors, and/or wore out sway bar bushings.

Aug 06, 2008 | 2002 GMC Yukon Denali

Not finding what you are looking for?
1997 GMC Sierra Logo

Related Topics:

943 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...