SOURCE: Power Steering Pump
you need an 18mm crows foot wrench 12" 3/8 extention N ratchet N 10mm socket. remove the belt, use crows foot to remove the pressure line, remove other tubes, remove 4 10mm bolts and pluck the pump out, go to autozone or some large chain auto parts store and buy a pully remover/installer use it then bring it back,( they have a loaner program) without the puller you will never get the pully off.
SOURCE: 98 F.Windstar replace power steering pump but still hard to steer
rack and-or pinion... Good thing the 98 is a very good and popular windstar, its not as bad as it sounds.
SOURCE: power steering pump on a 2001 ford windstar
There is a special tool for that. It should be available at most auto parts stores.
SOURCE: 1999 Ford Windstar-Will Turn over but won't start?
fuel pressure regulator could hav failed-located by engine or the ignition module may not be workin-by dist area try not to be a parts replacer-buy a repair book
SOURCE: 2003 dodge neon, error code PO551. power steering
The Power Steering pressure switch is mounted in the pressure line between the steering gear and the power steering pump.
Good Luck
236 views
Usually answered in minutes!
×