Question about Chevrolet Cars & Trucks

3 Answers

Hi I have relaced the idle valve on a Chevrolet Ulitiy bakkie and now the engine shakes like its gonna fall. Please help

Posted by Anonymous on

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Sounds like a vacuum leak

Posted on Aug 15, 2019

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Chevrolet Master
  • 9,099 Answers


I take help from online websites that have this service like helping in repair some like reliable-store have instant help.. others are a bit slow which I don't prefer... rest is up to u.. U can also get free manuals

Posted on Aug 15, 2019

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Chevrolet Master
  • 85,206 Answers

You relaced it?

Posted on Aug 15, 2019

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

micromaster

micromaster

  • 3614 Answers

SOURCE: 1995 accord LX engine shakes when starting

have you try cleaning also the air filters..? fuel pump..?

Posted on Jun 18, 2008

Anonymous

  • 2 Answers

SOURCE: zx2 engine stalls at idle speeds

Your symptoms can be from many things however I have seen this often from stopped up fuel filters in several different cars.
It could also be from very bad gas.
My suggestion is that if the car has high mileage OR you have recently goten gas from an unfamiliar service station, you shoudo change the fuel filter and put some good fuel additive in (after the new filter) to get rid of any water or other contaminates in the gas tank.
I recommend "SeaFoam". It is more expensive that others but has a very good reputation. It really works!

Armin W.

Posted on Dec 29, 2008

MrScary66613

Travis Humphries

  • 1990 Answers

SOURCE: 1997 chevrolet 1500 electrical problem

Had the same Problem on my 95'. Purchase an Interstate Battery and it will stop.

Posted on Jan 03, 2009

countrysi248

Jerry Koski

  • 443 Answers

SOURCE: I need to relace refriderant, where is low pressure valve on 1978 chevrolet van air conditioner?

ALWAYS use the larger hose to put in the freon .. the small hose is the high pressure side stay away from it.. you might look near your dryer or on the dryer to find the port to put it in .. your dryer is about 3 inches across and 8 inches long cylinder.. instal freon with car running and ac on high. an empty system takes about 3 cans normally .. when its about right your compressor should kick in because there is a pressure switch on the dryer that tells it to kick on .. holler if you need more Jerry and thanks ..

Posted on May 13, 2009

bpacman729

  • 2 Answers

SOURCE: Engine shakes on idle and in drive gear. Some say

Check engine and transmission mounts.

Posted on Aug 31, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Car cutting while driving and idling just keep going up and down


Check your RPM, check if it is rushing when you turn it on. Set the RPM needle to exactly 1.
Try this first.
or.......................

When slow down and stop the car engine shuts off Inspection Service Cost...
R33 GTS RPM Gauge Cluster Fix FIJI

Aug 23, 2016 | Chevrolet Cars & Trucks

1 Answer

I have a 2003 ford expedition and when you set and it idles for a bit like at stop light or just sitting in traffic it like sputters and feels like the whole engine is gonna fall out. Please help


hot or cold engine, or both? key,
key fact too, can you save the stall or low RPm with fast right foot action??????
that is misfire, can be caused by 50 things,
most things are in engine, like cracked valves or pistons,etc.
but in physics its just 3 (assumes battery is at 13.3v to 15v running)
stalls or near stalls.
when the engine shook, was RPM below 800 RPM
at below 500 all engines shake, that is normal for idle speed control failure.
ever service the engine? at every 60,000 miles,? do the listed things
in the operators guide? at the least spark plugs and filters.?
tune up parts are those parts that never last the life of an engine, 300k.+
no engine option stated. there are many.

800RPM hot misfire is another matter.
that will be (compression good all cylinder) bad spark on any ,bad fueling or egr stuck open (egr will cause dropping idle, if extreme leak)
no engine stated so cant look up if it has EGR. some engines dont
the use a detuned CAM to do same thing.
its and older truck some have huge mileage after , 11 long years. huge. (unstated )
oh all old cars or high mileage a compression test and leak down test
are the 1st step by me.
you cant burn fuel well with flat compression.

Jun 10, 2014 | Cars & Trucks

1 Answer

Engine shaking


with engine off push on the engine should not move much check this first. back and forward. side to side.

Mar 06, 2014 | Chevrolet Cars & Trucks

1 Answer

I opened up my 1400 nissan bakkies carburetor to service it and i am not sure where all the differentjets must go


In general there are fewer ways to adjust the newer carbs than the vintage carbs of the past. Often the vacuum at low idle is the problem and you should check a vacuum port on the intake with a Vacuum gauge. Sometimes an EGR valve does not shut completely and the engine struggles at idle. If you find that vacuum is adequate, you can adjust the air mixture screws to provide the highest vacuum reading and then crank them in until the vacuum falls less than 1 inch. It might be beneficial to run the engine and spray a water mist from a hand powered spray bottle around the seams of the intake and carburetor. Also spray any vacuum solenoids or lines. You will notice a change in RPM if there is a leak. You may have a fuelpump problem A clogged fuel filter or low pressure can affect how the caricon1.png idles. Please rate my info.

Jan 21, 2014 | 2007 Nissan 1400 Bakkie

2 Answers

Carburetor settings


In general there are fewer ways to adjust the newer carbs than the vintage carbs of the past. Often the vacuum at low idle is the problem and you should check a vacuum port on the intake with a Vacuum gauge.

Sometimes an EGR valve does not shut completely and the engine struggles at idle. If you find that vacuum is adequate, you can adjust the air mixture screws to provide the highest vacuum reading and then crank them in until the vacuum falls less than 1 inch.

It might be beneficial to run the engine and spray a water mist from a hand powered spray bottle around the seams of the intake and carburetor. Also spray any vacuum solenoids or lines. You will notice a change in RPM if there is a leak.

You may have a fuelpump problem A clogged fuel filter or low pressure can affect how the car idles.

Please rate my info.

Dec 08, 2012 | 2007 Nissan 1400 Bakkie

1 Answer

1992 chev lumina 3.1 eng. cuts off intermittently. sometimes when driving down the highway and others when idling around a carry-out resturant. Put in neutral and it starts back up. I have replaced the...


DO you have any engine codes still remaining? IF car restarts right away its gonna be tricky finding out what is dropping out. Engine codes are the best clue to start the hunt for problem. From experience however, I have had a few of these come in for same symptom. There are two wires that run from Ignition module/coil pack to the crank sensor, insulation falls off and they melt to each other or to hot engine, intermittent short disruption of signal, hence car stalls whenever wherever and restarts right away.

May 11, 2011 | 1992 Chevrolet Lumina

3 Answers

I have a 1994 with vortec 4.3 that shakes sometimes


Shakes how? While stopping? Or solely while idle, Engine light on?

If if shakes while stopping you need to check you're wheel hubs and or Suspension ,

Shakes at a light, You may have a bad fuel Injector, Check you're psi in you're fuel pump, A TPS would cause low idle or sometimes high idle, With low idle and a bad motor mount it would shake,

I know theres a few things I'm missing but,.. I have a major Headache atm so I'll get back to you with some more, when i can think better. :)

Sep 08, 2009 | 1994 Chevrolet S-10 Blazer

2 Answers

1987 chevy S10 engine idle problem


relace the throtle air idle valve.The temp switch will allso cause this problem.

Jul 19, 2009 | 1987 Chevrolet S-10 Pickup

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

85206 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...