At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Push the remote to lock door only one door will lock. push remote all doors will unlock. it is just the lock side want lock all door just the driver door.
There is a module on the drivers door latch that is more than likely to blame you will need to remove the door trim then remove the door latch disconnect the rods going to the latch then you will need the latch and the module that is attached after these are replaced the door locks should work fine
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
it is not the actuators, try a different remote, you may have an issue with the car security system/body computer not functioning on the unlock driver door command, one press of remote is unlock driver door and 2 presses is unlock the other doors.
this is a problem that can appear after your car battery died, cause the car didn't reset propely, so taking the battery out and putting it back in or letting your car die again would do the trick. I tried a lot of reprogramming procedured for my remote key, none of them worked, what did the trick though was simply unlocking the doors via the all door unlock button on the passenger side door, so simple.
Does the Driver side door lock and unlock from the lock switch inside? If not then you have a bad motor or bad connection to the lock/unlock motor inside the door.
the solenoid may be weak, or it can be lubed. you will need to remove the door panel and see how it works, and try to lube it, or see if there is any binding.
Press the passenger side door lock button. if the driver side door unlocks now but wont unlock when you hit the driver side door lock button, it is usually a network communication problem with the B CAN or a faulty Body Control Module.
I do have a book on the 1996 but no on me but I have had a problem with it the same, Get in and sit in the drivers set and push lock from the in side and then do the same but this time unlock it and then get out and try to use the remote. if no then try to do the same thing but in the passenger side. lock and then unlock. no then call the ford dealer shop and they have a alarm department that will help you and I know because I had then do a job on one of my other cars and I was charged $20.00 he did it on a side job.
Nikki2913
If remote locks and unlocks driver door but does not unlock passenger doors,then follow the advice above: Get in the car using the key to unlock the doors. From the passenger
side lock and unlock your doors using the button on the passenger
door. Get out and the remote should now unlock all the doors with 2
presses. Worked perfectly for me after several other suggestions (and dealer) failed.
×