I need a firing diagram for a 1998 chevy s-10 blazer with a vortec v-6

Chevy Blazer Engine Swap Part 1 of 2 - YouTube

? 10:29
https://www.youtube.com/watch?v=Dt_7AKP2WcI
Aug 13, 2011 - Uploaded by Dave R
Replacing the engine in a mid-size Chevy Blazer 4x4 with oneout of a Jeep Cherokee 2wd. Original engine was low and motoroil and spun a bearing. ... Chevy Blazer Intake Gaskets Replaced & Cooling System Rebuilt - Duration: 16:45. by ... 4:02. 94 4.3l Vortec V6 GM (black motor) - Duration: 6:01. by ...

4.3 vortec engine removal - YouTube

1-6-5-4-3-2 The driver side is odd and the passenger is even. front of the motor is low number cylinder going up to the firewall

1-6-5-4-3-2



Thanks for using FixYa.

Kelly

For the 1998 Chevy Blazer 4.3L V6:

Firing Order:
1-6-5-4-3-2

Cylinders:
......(back)......
|..6..|.......|..5..|
|..4..|.......|..3..|
|..2..|.......|..1..|
......(front)

Distributor Connections:
...........(back)
Coil-> o
6-----> o.......o <-----5
4-----> o.......o <-----1
2-----> o.......o <-----3
...........(front)

Let me now if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

this should be the cyliner order and firing order for it.

back of engine

5 6
3 4
1 2

front of engine

the firing order is 1-6-5-4-3-2

Hope this was of help to you.

1-6-5-4-3-2
heres a link to help you, good luck.
http://images.google.com/imgres?imgurl=http://www.2carpros.com/forum/automotive_pictures/170934_firing_order_1.jpg&imgrefurl=http://www.2carpros.com/forum/1998-chevy-blazer--spark-plug-wires-vt257725.html&usg=__mEuwyzlUpS9OE3hDhooTkWaPA7s=&h=260&w=278&sz=15&hl=en&start=1&um=1&tbnid=FCT3-hbHWraurM:&tbnh=107&tbnw=114&prev=/images%3Fq%3D1998%2Bchevy%2Bblazer%2Bfiring%2Border%26hl%3Den%26sa%3DN%26um%3D1

The fuel pump specs are 14 psi. and 20 gallons an hour.

1-6-5-4-3-2

you need the firing order?? it is 1, 6, 5, 4, 3, 2 clockwise. Number one on cap is forward position, or 6 o'clock position, just left of the hold down bolt.