Hi there i have polo iv put a BAH sub thn the top its a BHL. bt now it idles like a deasel what can can i do

johnny rebel

• 10875 Answers
• Posted on May 23, 2015

SOURCE: hi guys i need to set up my pickup plate from the crank sensor on my polo bah engine..how do i go about

VW POLO,,, http://www.bing.com/videos/search?q=polo+bah+engine&FORM=HDRSC3

polo bah engine Bing Videos

bing.com

Colin Stickland

• 22516 Answers
• Posted on Jul 13, 2015

SOURCE: HOW DO I LINE UP THE TIMING RING BY THE REAR MAIN OIL SEAL ON A POLO 1.6 8VALVE BAH MOTOR

Your joking of course its all part of the flywheel and has a locating pin or offset fixing bolts ,so its fixed in position now have another look .

Testimonial: "Thanks colin very helpful indeed"

Marvin

• 85242 Answers
• Posted on Jul 13, 2016

SOURCE: My vw polo bah 1.6i has no spark what could be the problem and how do I fix it

First you need to run an OBD2 fault code test and post the results.

Marvin

• 85242 Answers
• Posted on Feb 17, 2017

SOURCE: Revs inconsistency and cold start

Try cleaning the throttle valve and the idle speed control valve.

Malcolm Campbell

• 248 Answers
• Posted on Apr 18, 2017

SOURCE: vw polo 2007 has a problem starting iv chnged airflow sensor,the air filter bt nothing.ull start the car it will idle for a second then off it goes even with ur foot flat on the gas peddle it goes off

This sounds like a fuel problem the engine is starved of fuel, check your fuel pump clean the filter in the pump, It could even be that you will need to replace the fuel pump. Cheers, Malcolm Campbell.

Testimonial: "thanx your answer is relevant to the one i got elswhere"