Question about Isuzu Cars & Trucks
Yep the spark plugs wires has 4 ring seals on them.
Posted on Apr 05, 2019
There are rubber seals on the valve cover that stop oil from getting into the tubes. These aren't called grommets though, though they may look similar. A grommet is to top protect wiring or other items from being damaged by sharp edges of meter as they are rooted through an opening.
Posted on Apr 05, 2019
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Isuzu seem to have complicated things by changing engines, firing orders and even direction of rotation! As you can see, they've numbered the cylinders the other way than the 3.2L.
The Firing sequence for the 3.1 (traditional distributor) 6 cylinder is as follows -
If you take the distributor cap off, there should be a "No.1" formed on the inside. Stick a lead on this before you put the cap back on and go from there.
As leads are different lengths, you may have to swap a few to find the best fit.
I think 2 of them will look out of place - but that's the way it's designed. Just make use of clips for holding them neatly.
Thanks for using Fixya.
Posted on Jul 06, 2008
SOURCE: Isuzu Rodeo w/3.1L engine
Front Passenger side on cap is 1 - if you look on the inside of your cap there SHOULD be a pin marked with a 1, and the plugs go CLOCKWISE not counter. Just had the same problem myself with my 91 Rodeo. Cylinders are as follows Passenger side (front to back) 1 - 3 - 5, Driver side (front to back) 2 - 4 - 6. I called the Isuzu dealer and they told me it was counter clockwise, but when I hooked it up that way it backfired through the Carb.
Posted on Jul 19, 2008
In the center of each valvecover is a well with a wire in it each wire has a seal cap attached pull up and youll find a stem which goes down a tube this is part of the spark plug wire the plugs are at the bottom of this tube youll need a long adapter on your wrench and socket for this job and you can extract the plug using the wires stem
Posted on Aug 04, 2008
joyce, there are different specs for sohc and dohc engines. my advice is to get a Haynes manual from the auto parts store.
Posted on Sep 01, 2008
Tips for a great answer:
Sep 24, 2014 | 1997 Isuzu Rodeo
Dec 11, 2012 | 1995 Isuzu Rodeo
Jun 14, 2012 | 1998 Isuzu Rodeo
Aug 18, 2011 | 2000 Isuzu Rodeo
Oct 07, 2010 | 1994 Isuzu Rodeo
Dec 08, 2009 | 1995 Isuzu Rodeo
Jun 04, 2009 | 1993 Isuzu Rodeo
Jan 02, 2009 | 1998 Isuzu Rodeo
Jul 27, 2008 | 1994 Isuzu Rodeo
52 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: