Question about Dodge Ram 2500
Sound like transmission 2 - 3 shift solenoid failed.need let a garage or transmission shop check it out.
Posted on Apr 05, 2019
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
fuel filter housing on driver side of motor. need the correct size of socket to remove the lid. unscrew lid and pull straight up to remove filter. remove old filter from lid and install new filter and seal. drain old fuel/water from housing. then reinstall filter into housing. tigthten lid then make sure the petcock is closed from draining it earlier. bump the starter a couple times to fill the filter housing then start engine. clean any spilled fuel and your done
Posted on Jan 22, 2009
SOURCE: 2002 dodge ram 2500 diesel
When your truck is shifting like you mentioned you need to check the battery cables. Better yet just replace the cables. Even a small amount of corrosion can cause a break down in the flow of current to the trans computer and cause erratic shifting. New cables should fix you right up. If this does not take care you need to start looking into "noise" from the alternator wire or other electrical interferrence. Another possible solution is to install a Hapi Box which clears interferrence in the wire from the TPS to the trans computer. It worked on my '02 until the cables corroded. I stripped back about 6" and found a mess in there. Good luck. (oh, Dodge will seel you a new trans to fix this problem. Be ware.)
Posted on May 23, 2009
Straight forward job. Remove wheels, remove 2 caliper bolts per wheel, check bolts,and bushings for wear/corrosion and lubricate, remove calipers, remove brake pads, push caliper pistons into calipers, replace anti-rattle clips, put new pads in, put caliper and bolts in, put wheels on. Start truck and press brake pedal several times to take up slack and you're done.
Posted on Jun 02, 2009
Zerex's G-05 type coolant is specifically formulated for Chrysler specs.
Thanks for using FixYa and please do rate my answer.
Posted on Nov 22, 2009
The re-fill kit for the r-134 will only fit on one of the sides. You want to fill the low pressure side, but be sure you have a gauge not to overfill. he high pressure will be the larger side. But the gauge will only fit on one of the inlets for safety precautions.
Posted on Jun 07, 2010
Tips for a great answer:
Oct 20, 2015 | 1995 Dodge Ram 3500
Apr 13, 2014 | 2006 Dodge Ram 2500
Jul 29, 2012 | 2006 Dodge Ram 2500
May 27, 2010 | 2006 Dodge Ram 2500
Nov 13, 2009 | 2006 Dodge Ram 2500
Sep 24, 2009 | 2006 Dodge Ram 2500
Sep 19, 2009 | 2001 Dodge Ram 2500 Truck
Jul 28, 2009 | 1999 Dodge Ram
Mar 13, 2009 | 2006 Dodge Ram 2500
51 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: