I would leave as is.
SOURCE: 2008 Equinox Horn Replacement
Hiya
There's 2 horns-one is a low-note pitch on the driver's side and a high-note pitch on the passenger's side.
Both are bolted vertically onto the 'front-under' frame below-behind the headlight area....located just above the steel front interior bumper frame area.
Unplug the black wire from the horn's plug socket.
While you shop for new horns at the store, use the original horn to determine the new horn's plug socket can fit the black wire plug that you took it off from the original horns.
Hope it helps.
SOURCE: suddenly all this clear oily substance is on my
It could be a simple rubber hose that is worn. Take a flashlight or any portable light and check your power steering oil lines. Be more careful at the side of the leak.
SOURCE: Equinox has wet floors on both sides in
1) don't these cars come with a 5 year 50,000 mile warranty? if so take it to a dealer
2) if not under warranty I would replace the washer fluid lines coming from the washer fluid reservoir. something has become disconnected and fluid is not getting to the nozzles. you may need a repair manual to show you how to get to them.
SOURCE: Looking for instructions on replacing
It is very simple. All you need to do the job is a small screwdriver or pick. Open the lift gate. (it may be helpful to get someone to help you hold it open while you are working.) Use the screwdriver or pick to lift the spring clip from the ball end of the lift strut and pull the lift strut off of the ball mount. Repeat this for the other end of the lift strut. The new struts should have new clips already in place. Simply push the ball ends of the new lift strut onto the ball mounts until they "click" into place.
Repeat the proceedure for the other lift strut if you are replacing both of them.
SOURCE: need to replace the coolant sensor on a 2008 chevy equinox
One should be around the thermostat and one (if you have one) on the radiator
42 views
Usually answered in minutes!
×