Check the rack and pinion. It may need replacing.
Is the check engine light on?
SOURCE: 2001 chevy monte carlo hesitates or stumble on acceleration
try to clean the MAF which locat on the throtel and check the spark plugs from miss fire
SOURCE: 2004 chevy aveo jerking and cutting out
Have your MAF sensor ck'd or replace. It controls your fuel/ good luck
SOURCE: I can't open the gas door on my chevy aveo.
To open the fuel filler door, pull up on the release lever with a gas pump symbol on it. It is located on the floor on the left side of the driver's seat.
Please leave feedback if this helped. Thanks!
SOURCE: When i accelerate there is hesitation and jerking?
It means there is a problem in the carburetor of your car . But if then so you still have to check the accelerator springs and pedal. For there are worn out or destroyed parts then replace them for good .About the carburetor.Prepare the equipment or tools to be used in servicing the carburetor .So that when carburetor will be repaired or serviced no parts will be damage or lost. Locate the carburetor. Disconnect the fuel lines , the accelerator cable and the magnetic jet from the carburetor.Dis -assemble the carburetor.Clean carburetor with carburetor cleaner.Don't forget to observe safety rules. If there are worn out parts or destroyed parts then replace them .But you the owner don't have time to do the job then go to a car shop mechanic and let them do the job.
SOURCE: my 2000 chevy impala shakes while driving.i let
It sounds like you might need to replace your motor mounts, or get a tier allignement done. The allignment you cannot do yourself but the motor mounts you can this requires you to place a jack under you engine and undoing the motor mounts then replace them and take away jack.
522 views
Usually answered in minutes!
×