Were is the egr valve located on a 2005 Saturn Vue 2.2 engine

SOURCE: Cannot locate oil drain plug on 2004 Saturn Vue

It is probably a bit different on the 4-cyl engines than the V6 engines. I'll assume you have the V6 for the moment since those seemed to be more popular.

On the 3.5L V6, the drain plug is behind the passenger side wheel well and I believe takes a 17mm socket/wrench to remove.

SOURCE: 2005 Dodge 1500 code p0404 EGR valve.

The electronic EGR valve and solenoid assembly is attached to the rear of the left cylinder head ,

1. Remove electrical connector (5) at top of EGR valve solenoid.
2. Remove tube mounting bolt (1) at intake manifold.

1. Remove two bolts (4) connecting EGR tube (1) to valve assembly.
2. Remove gasket located between EGR tube flange and EGR valve assembly.
3. Remove two EGR valve mounting bolts (5).
4. Separate valve assembly (3) from engine.
5. Remove and discard metal gasket located between cylinder head and valve assembly.

1. Clean area at rear of left cylinder head where it joins base of EGR valve.
2. Clean EGR tube where it joins EGR valve.
3. Position new gasket between EGR valve and cylinder head.
4. Position EGR valve to cylinder head. Install and tighten two bolts (5). Refer to Torque Specifications.
5. Position new gasket between EGR tube flange and EGR valve assembly.
6. Position EGR tube (1) to side of EGR valve and into intake manifold.
   1. Install EGR tube flange bolt (1) at intake manifold. Tighten bolt. Refer to Torque Specifications.
   2. Connect electrical connector (5) to top of EGR valve solenoid (2).Do a final tightening of two EGR tube bolts (4). Refer to Torque Specifications

SOURCE: egr valve on a 2002 Saturn SL1

Take off air breather tube,you should see a cone shaped part, on top and at back of engine right by the gas pedal cable. Remove the 2 10mm bolts, and it should come right off.

SOURCE: EGR Location

On the left side at the rear of the engine, and it isn't fun to change.

SOURCE: Code P0406

Where is the egr valve on my crystler 300?