Question about Peugeot Cars & Trucks
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
there is no other option...as long as the light is on there is a chance the airbag will either not work in an accident or it may deploy without warning. how many miles do you have on the vehicle??? there is a chance if you contact chrysler customer relations they may assist in the repairs.
Posted on Jan 25, 2009
you have to be careful with the airbag connectors, they may look fitted but sometimes they dont go fully in - so check. on the steering wheel there is a black earth wire connected to a male connector, you need to cut the end off the wire and put a round earth terminal on it, then drill a small hole in the metal part of the steering wheel and fit a self tapping screw through the electrical connector you fitted and screw it into the hole you drilled. that is the usual cause for the horn not working e.g. bad earth connector on steering wheel. if you are not sure ask someone that knows about electrics
Posted on Aug 02, 2009
SOURCE: The Air bag light came on solid
If you want your air bag to work, you should take the vehicle to a shop for service. This light indicates it probably won't deploy in an accident.
Posted on Aug 22, 2009
common fault defective centralita computer sorry forgotten name in english been in spain too long .When they get hot where car is left in hot sun the lights start blinking ,these cars and citreons suffer from this fault but not often,cure new centralita ,Once vehicle goes to the test and they see it then its about 2000euros to fix because it will not pass without the relevant paperwork and certificates from dealer,Best advice sell it quick before it costs a lot of money to fix
Posted on Jan 17, 2010
Did you have the code cleared after you installed the new part because the ECM cannot clear itself, even though you installed a new part and the code is still in the system? You need to have the code erased with a OBD II scanner.
Posted on May 27, 2010
Tips for a great answer:
Jul 13, 2012 | Peugeot Cars & Trucks
Sep 18, 2011 | Peugeot 405 Cars & Trucks
Feb 03, 2010 | Peugeot 405 Cars & Trucks
Jan 17, 2010 | 2005 Peugeot 405
Oct 08, 2009 | 2005 Peugeot 405
Sep 15, 2009 | 2005 Peugeot 405
Jul 26, 2009 | 2005 Peugeot 405
31 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: