SOURCE: dodge nitro ''change oil'' light reset, how???
Turn the key on, engine off, slowly depress the accelerator pedal to the floor three times within ten seconds. Turn the key off. Turn the key on and start the vehicle. If it is still on repeat the process.
SOURCE: transmission input speed sensor location
It is located on the front of the transmission. you will see 2 of them one on the left under small transmission lines it is the input then to the right behind the radiator overflow there is the other one. Easiest way to change them is with a 1" deep well socket
SOURCE: I need to replace the transmission speed sensor
usually they are at the back of the tranny with a 2 wire plugin and one bolt holding it in...if not it may be part of your rear ABS sensor in your rear end...do you have any codes about ABS
SOURCE: i have a 1996 dodge caravan with the 3 speed
A 3 SPD TRANS DOES NOT HAVE INPUT/OUTPUT SENSORS..ONLY A VEHICLE SPEED SENSOR..IT IS LOCATED ON TRANS EXTENSION HOUSING WHERE RIGHT SIDE AXLE COMES OUT OF TRANS..1 BOLT AND A WIRE CONNECTOR
SOURCE: reset transmission speed sensor 93 honda accord
I have been looking for help with the VSS on 88 prelude. Found this page,maybe it will help you.
.http://techauto.awardspace.com/vss.html
97 views
Usually answered in minutes!
×