I assume you have a p0108 code. The MAP sensor is integrated into the EGR valve. I don't think you can get just the sensor. The EGR valve assy is around $100 from your local parts store.
SOURCE: running poorly and will not idle 1998 ford explorer 6 cyl
it was a PO 1505 code idles speed control wiring problom broken wire in the wire harnes running great
SOURCE: 2005 Ford Mustang GT -loud clicking noise in audio system
There is a possibility that the cellular phone is interfering with the audio system. Cell phones communicate on their own with cell hubs to change locations, or to receive mails. Try to place the celular in a different position, or to turn it off on a single trip to see if the clicking disappears.
SOURCE: map senser location on a 1990 BUICK LESABRE
The sensor is a screen-looking device...located at the input to the fuel injection port. Follow the large air hose from the air filter...it should be easy to see once that end of the hose is disconnected.
Try cleaning it before replacing it...I use carb cleaner (generous spray of it directly on the screen). Then reset the Check Engine light (AutoZone can read and reset for you free).
SOURCE: 2005 Ford Mustang fuel filter replacement. Location and how to do it!
located twards outer edge on the underside of the car under a plastic cover
SOURCE: location of a/c drain tube on 2005 ford mustang
check your a/c hoses or compressor for a valve that looks like a tire valve it should have a coloured cap on it.
960 views
Usually answered in minutes!
×