Need to do cv joints
SOURCE: CV joint replacement
Generally no tool is required. If you use a "pickle fork" you will risk damaging the dust boot.
Have you tried whacking the spindle right near where the ball joint stud comes through? This will take a few good shots to break it loose.
Be careful not to hit the threads!
SOURCE: cv joint replacement 1998 isuzu trooper 4x4
This is a simple job that is why it is not very detailed in your book. Nothing special. Do one side at a time so you have a reference to how to reassemble it. Remove your tire , brake calipers be sure not to stress the rubber brake lines or open the brake lines to air. Remove both upper and lower ball joints. When taking out the ball joints remove the cotter pin and bolt and beat the **** out of the joint for it to release. Then the C/V axles will come right out with a bit out encouragement. You will need a few tools wrenches pry bar hammer. I would buy a Chilton's or a Haynes repair manual for torque specs for reassembly. Good luck and take your time. And unless the axles are making noise you can just replace the rubber boots. Which is alot cheaper.
SOURCE: I AM TRYING TO FIND A FREE DOWNLOAD OWNERS MANUAL
Hi,
As desired please find the link (Online PDF)
http://pdfdatabase.com/index.php?q=mazda+626+manual
Please let us know if that was helpful l enough.
Thanks
Kanu.
SOURCE: I need a free online repair manual for a mazda 626
I found your manual @ Autozone.com for that specific model & engine & they do have the repair guide for that specific job available if you just take a moment to register & enter the basic info. AND IT'S FREE!!!
Good Luck
SOURCE: I need a 2001 Mazda
Hi! There seems to be no site for a 2001 mazda 626 cylinder repair. Try haynes or chilltons manual from the bookstore or autoparts supply. Hope this helps and have a good one!
Testimonial: "Thanks"
69 views
Usually answered in minutes!
×