SOURCE: need to know cylinder head bolt torque specs
Head Bolt Torque
For your 1994 Oldsmobile Cutlass Supreme (3.4L SFI DOHC):
Foot pounds (Final torque)
Note:
Torque sequence --------- | 6 2 3 7 | | 5 1 4 8 | --------- Step 1: torque in sequence to 33 Ft/Lbs Step 2: turn an additional 90 degrees Recheck final torque in sequence *** CAUTION ***engine uses Torque To Yield head bolts (TTY) thatpermanently stretch during the initial installation.New head bolts must be used when cylinder head isreplaced or re-installed to obtain proper torque.
Foot pounds (Final torque)
Note:
Torque sequence --------- | 8 4 1 5 | | 7 3 2 6 | front --------- of engine | 6 2 3 7 | | 5 1 4 8 | Step 1: torque to 40 Ft/Lbs --------- Step 2: turn an additional 90 degrees Recheck final torque in sequence *** CAUTION ***engine uses Torque To Yield head bolts (TTY) thatpermanently stretch during the initial installation.New head bolts must be used when cylinder head isreplaced or re-installed to obtain proper torque.
SOURCE: Conversion kgf.m to foot pounds.
1 kilogram meter = 7.233 013 831 6 pound foot
you can use a online converter like the http://www.onlineconversion.com/torque.htm
3.5 kilogram meter = 25.315 548 411 pound foot
4.5 kilogram meter = 32.548 562 242 pound foot
Testimonial: "Thanks,very help full + on line converter info grate. "
SOURCE: i need the engine torque specs for 99 chevy malibu
99 chevy malibu v6 3.1 engine, head bolt torque is-- 98 through 2001 is step1- 37 foot lbs, step 2- rotate an additional 90 degrees (1/4 turn). the rocker arm bolts are 168-in. lbs.
SOURCE: how to torque engine heads,rod
cylinder head bolt torque for a DOHC Turbo 3.0L V6
92 ft lbs.
cylinder head bolt torque for a Non-Turbo
76-83 ft lbs.
main bearing caps
mark on head of bolt "9" 59 ft lbs.
mark on head of bolt "10" 70 ft lbs.
connecting rod nut 38 ft lbs.
Foot pounds (Final torque)
Note:
Torque sequence --------- | 6 2 3 7 | | 5 1 4 8 | --------- Step 1: torque in sequence to 33 Ft/Lbs Step 2: turn an additional 90 degrees Recheck final torque in sequence *** CAUTION ***engine uses Torque To Yield head bolts (TTY) thatpermanently stretch during the initial installation.New head bolts must be used when cylinder head isreplaced or re-installed to obtain proper torque.
Foot pounds (Final torque)
Note:
Torque sequence --------- | 8 4 1 5 | | 7 3 2 6 | front --------- of engine | 6 2 3 7 | | 5 1 4 8 | Step 1: torque to 40 Ft/Lbs --------- Step 2: turn an additional 90 degrees Recheck final torque in sequence *** CAUTION ***engine uses Torque To Yield head bolts (TTY) thatpermanently stretch during the initial installation.New head bolts must be used when cylinder head isreplaced or re-installed to obtain proper torque.
343 views
Usually answered in minutes!
HIS HELP
×