How do i reset my throttle position sensor on my 2010 JOURNEY

1. Dirty or clogged fuel injectors: Over time, fuel injectors can become clogged or dirty, which can affect their ability to deliver the correct amount of fuel to the engine. This can result in an engine that starts but won't idle properly.
2. Malfunctioning idle air control valve: The idle air control valve (IAC) is responsible for regulating the amount of air that enters the engine while the vehicle is idling. If the IAC is malfunctioning, the engine may not receive enough air to maintain a steady idle.
3. Vacuum leak: A vacuum leak occurs when air enters the engine through a crack or hole in the intake system, which can result in an unstable idle or engine stalling.
4. Malfunctioning throttle position sensor: The throttle position sensor (TPS) is responsible for communicating the position of the throttle to the vehicle's computer, which then adjusts the amount of fuel and air delivered to the engine. If the TPS is malfunctioning, it can affect the engine's ability to idle properly.
5. Faulty spark plugs or ignition system: If the spark plugs or ignition system are faulty, it can cause the engine to start but not idle properly.

https://erwinsalarda.com/how-to-reset-dodge-journey-oil-change-reminder-reset/

STEP 1

• Shift the gearbox to Park Position.

STEP 2

• Close all doors.

STEP 3

• Push the start button to RUN Position (Ignition On) Don't start the engine.

STEP 4

• Fully depress the GAS PEDAL slowly three times within 10 seconds Make sure to depress the pedal all the way down.

STEP 5

• Turn the ignition off and start the engine to verify the indicator has been reset. Repeat this procedure, if the message still illuminates when you start the engine.