SOURCE: 2001 Chevy impala had ignition switch replaced,
Turn the key to "on" and let the light flash. It should stop flashing after about ten to twenty minutes. Once the light is on steady, turn it off, then start the car. I usually put another battery on jumper cables attached to the cars battery so it does not run down and die before the system re-arms.
SOURCE: I replaced the ignition in my 04 chevy Impala and
You have to have the key coded with the ignition switch at a lock smith,or the dealer.
SOURCE: Replaced ignition switch 2003 chevy impala and car will not start
After you replace the ignition switch turn the key to start the car and release leave the key were it stops after trying to start wait 10 minutes until security light goes out turn key to full off position then repeat the above procedure two more times for a total of three on the 3rd attempt to start car wait for light to go out then turn key to full off positoion wait 10 seconds then try to start car body control module should learn new pass code and the car should start.
Big john, J@J Automotive
SOURCE: ignition switch 2001 chevrolet impala
YOU NEED A HAYNES REPAIR MANUAL WITH PHOTOS TO SHOW YOU HOW TO REMOVE STEERING WHEEL AND DISABLE AIRBAGS.YOUR IGNITION SWITCH IS IN THE STEERING COLUMN.
SOURCE: My key will not turn my ignition switch. Yesterday
you can look at this website, it may help Tim:
http://wiki.answers.com/Q/How_do_you_unlock_a_steering_wheel_It_is_locked_and_the_key_will_not_work
482 views
Usually answered in minutes!
×