You have to know what makes the engine stop. It could be many things that cause your problem.
When you put it into gears the engine move so it could be an open circuit or short to ground.
1- The engine load (Mass air flow)
2- Low Fuel pressure
3- Etc........
Start with a scanner and retrieve any engine fault code. If there is, fix it.
There is not much info on your problem if you try something.
Need more info to help you out to solve the problem.
Hope it helps.
SOURCE: 2001 Yukon XL SLT 4 speed Auto Transmission shift problem!
Sam,
I would start with a transmission fliud and filter service.
I would then have the trasnmission checked out by a transmission shop. The transmission most of the time has the direct drum band is starting to go. The shops can rebuild it no problem, This is a very common failure wiith the trasnmission.
Good Luck
Testimonial: "Thanks alot richtko94'! I'll try that!"
43 views
Usually answered in minutes!
×